How we print

Every print leaves our own atelier near Bucharest. We do not use outside print shops and we do not print in bulk.

Equipment

We work with an Epson SureColor P900, built for photo and fine-art prints up to 17 inches wide, which is A2.

It uses a 10-colour ink set and a resolution of up to 5760 × 1440 dpi, which keeps the fine detail of guilloche borders, seals and small text.

We print on Epson Premium Luster Photo Paper, 260 g/m², with a lustre (semi-gloss) finish.

File preparation. Every design is prepared at its final print size (currently A2), with a 5 mm bleed.
Printing. The print is made in the atelier on the Epson SureColor P900.
Trimming. The bleed is trimmed off and the print ends up at 41 × 58.4 cm.
Inspection. We check every print before packing: colour, alignment, cleanliness.
Packing. The print is covered with acid-free glassine, rolled into a rigid cardboard tube with end caps and sealed with our sticker, so it reaches you without creases.

Guilloche borders, seals and small text are drawn to be read up close. That is why we print at full size and never scale the design down.

Prints are handled with protective gloves so the paper stays clean, and each one is checked before packing.